The all-in-one validation package for your humidity sensors
產品特點
Truly portable at 7lb, and completely self-contained
Intuitive UI makes automating probe verification simple
Integral battery pack means validation can be done without access to services
Validate 7 probes simultaneously
Automated validation procedures for complete hands-off probe verification
Internal calibration correction cycle ensures continued confidence
Optional chilled mirror reference hygrometer, allowing use as a calibrator
Download logged verification data direct to USB memory
Chamber Integrity
The HygroCal100 has a test chamber milled from a solid pieceof Acetal, with minimal sealing points, ensuring the integrity required to maintain <5% RH from laboratory ambient temperatures, and ±0.5% RH uniformity across the chamber.
Portability
The HygroCal100 can optionally be fi tted with a high capacity battery pack, which can power the generator and 7 sensors under test for up to 8 hours. The unit can also run from mains power while charging the battery.
An optional hard carry case is also available with the unit. This has space for the HygroCal100 itself, in addition to the battery charger, spare water and desiccant.
Integrate Your Own Reference
The HygroCal interface allows you to assign any hygrometerwith an analog output as your reference device, giving you the fl exibility to incorporate your traceable reference in your validation routine.
Automated Validation
The HygroCal100’s advanced UI allows you to defi ne your own calibration procedure, point-by-point, assigning times to each condition to allow your probes under test to stabilize. The system always waits until the conditions in the chamber are completely stable before beginning the check.
Correct Chamber Control To Your Own Reference
To ensure continual long term stability of the chamber, the inbuilt calibration correction system can compare the readings of your traceable reference to a range of pre-set generated conditions – making adjustments to the control sensor to ensure that your set point always matches your own reference.
敬請點擊網站頂部的“新用戶申請”按鈕或聯系我們獲取您感興趣的產品資料
about us
關于我們 公司簡介 發展歷程 隱私政策 使用條款 網站地圖contact us
聯系我們Product
產品 溫、濕度測量 過氧化氫、溫、濕測量 露點溫度測量 二氧化碳濃度測量 壓力測量 微差壓測量 風管風速測量 油中水分含量測量 油中氫含量測量 液體濃度測量 空氣品質測量 溫、濕、壓一體測量 氣象參數測量 煙氣參數測量 EMS系統及數據記錄儀 顯示及控制儀表 顆粒計數 校準設備Industry Solutions
行業解決方案 受控環境關鍵參數監測系統 分布 驗證 大氣環境監測 行業應用案例Technical support and service
技術支持與服務 校準服務 維保服務 技術支持 培訓服務 應用視頻溫濕度 顆粒度 浮游菌落 微差壓 記錄儀 露點 水分 二氧化碳 水活性 風速 風量 風向 壓力 氣象測量 產品成套 系統集成 解決方案 校準服務 分布驗證服務
上海博眾測量技術有限公司 版權所有 @2014 電話: 0086 21 66308161/2/3 傳真: 0086 21 66308167 滬ICP備19012424號-1 E-mail: [email protected]
手機客戶端二維碼
微信
